ensure the bed rail is suitable for the size of the occupant. Standard bed rails usually suit someone over the size of an average 12-year-old and are unsuitable for a smaller adult, young child or baby; the amount of noise made by these units varies. Personal preference and whether other people nearby will be disturbed needs considering. Air bags tend to be noisier and hydraulic pistons quieter; Unroll the duvet and remove the noodle – your bed should be made. FAQs What is the easiest way to put a duvet cover on a duvet? These are made up of two circular discs that rotate against one another. They are useful for someone who can semi-stand or who can use a board as a bridge (but finds it difficult to turn, step or adjust his/her feet) to transfer directly from bed to chair. Users place their feet on the disc and, as the transfer is made, the disc swivels.

In the US a duvet isn't always used. During summertime, a flat sheet on top of the fitted sheet may be just enough to keep you snug. If you do use a duvet, the way to dress is it generally layered over the top of the flat sheet, and let it hang over the sides for an effortless look. An oversized duvet will also help to conceal any unattractive side of your box spring or bed frame or any underbed storage. Flip the duvet and hold the end with the opening by the corners to give it a final shake to spread the duvet evenly throughout the cover. If you have an outside space and a clothesline, then this step could revolutionize your bed-changing routine. Martin Seeley, founder and CEO of MattressNextDay recommends this method especially in the summer if you've already had your bed sheets hanging outside to dry. You won't need to take them down, rather put the duvet cover on while taking down the rest of your washing. Alternatively, you can use the curtain rod if you're able to reach it. He breaks down the steps below:a more comfortable and stable position can be achieved in a bed with four sections, as the user’s bottom remains horizontal while the knees are raised to form a break; Lifting poles (or pull handles) are designed to make moving around, moving into semi-lying positions or getting in and out of bed easier. The majority have a floor standing cantilever gantry, although some are wall- or bed-attached. If freestanding, care should be taken to ensure that the base is positioned properly under the bed, otherwise the gantry frame may tip over. A handle hangs from the gantry and, when adjusted to a suitable height, some people with enough strength can pull on it safely. The user does need to have fairly strong upper limbs and good abdominal control. However, other items are regarded as daily living equipment, i.e. that which enables a person to get on with daily living, and may make them more independent.

Standard rails have safety catches on the outside. These can prevent an otherwise independent person from getting out of bed and going to the toilet. Bed leg raisers are placed under the legs to raise the height of the bed. This can make standing easier. However, once raised, the height of the bed is set and the problems mentioned before may sometimes still be encountered. For example, although the raised height helps a person to stand it is too high for them to sit safely on the edge of the bed and/or to lift their legs into bed. Some electric beds can be controlled by the occupant. This means he/she can select the most suitable height for getting in and getting out of the bed, sometimes with little or no assistance. Always ensure that the appropriate model of raiser is used for the bed leg, e.g. castor, square leg. The following are examples of types that are available: Sometimes small handling equipment is used to help people move in bed. Advice should be sought from a therapist on the safest handling technique and the equipment to use.

Buy your Duvelope.

The roller is placed across the bed and under the user who is lying flat on the bed with the open ends facing the head and feet. Once the roller is positioned some users find they can then turn independently. Alternatively, carers can assist the user by pulling on the top layer of the roller or by pulling on a correctly positioned handling sheet on top of the roller. those with a powered mechanism are usually controlled with a handset. Although powered by a motor, most are quiet or almost silent;