SCULPFUN Laser Rotary Roller, Y-axis Rotary Roller for Laser Engraver Cutter Engraving Cylindrical Objects and Cans with 360°Rotating and 4 Height raisers, Support Diameter 6-150mm

Product Information

Engraving Table Height】 This aluminum rotary laser engraver has a height of 2.36”. Please ensure the space between your machine’s laser head and engraving table can accommodate this added height. Adjustable axes distance up to 3.39” to process a wide range of cylinder diameters. Note: The front roller is a fixed roller and cannot be moved, only the rear roller can be adjusted. Test fire your laser at a low power, 5% or less, and make sure that your laser is focused to a tiny point. You can get millions of free vector designs on the internet, or you can use free vector drawing programs like Inkscape or QCAD (for more technical drawings) Place the rotary axis in an appropriate position on the table, and connect the machine X-axis motor cable to the rotary axis stepper motor.

Sliding space adjustment: SCULPFUN roller adjusts the size of the space between the two rubber rollers by sliding, and fixes the rolloer by handscrew, which is simpler and faster than the traditional multi-stage fixing hole adjustment. Sliding adjustment of the shaft spacing: SCULPFUN roller adjusts the size of the space between the two shafts by sliding, and fixes the shaft by turning the knob by hand, which is simpler and faster than the traditional multi-stage fixing hole adjustment.Free useful accessories: a free soft ruler to measure the size of object; 4 free raising feet, which can be used to increase the height of a variety of machines. Huge engraving space and 4 raising feet: SCULPFUN roller base design is lower and stable, and equipped with 4 sturdy metal raising feet, so that it has a larger engraving diameter of 6-150mm, which can meet more engravings. need. Metal feet are more solid than plastic feet, and the machine is more stable when engraving.

There is a bar that says "type gcode here," select it, type the following depending on which step you followed previously: Adjust the position of the rotary axis so that your cylinder will be parallel to the X-axis and perpendicular to the Y-Axis. Step 2B: Installation Guide for if your Machine has Two Y-axis stepper motors Set the steps per millimeter (“steps/mm”) correctly (firmware). The LightBurn assistant is not required and is not activated. and press the connect button to the right of the baud rate value. If successful, the console should show "grbl 1.1f" or grbl 1.1h"A great upgrade for a cutting surface is a HONEYCOMB BOARD. It makes a big difference and the bottom side remains clean when laser cutting. Application: This machine can work with a number of different Sainsmart machines to engrave on materials with a cylindrical shape. Z-Axis: the controller board offers another port for a z-axis motor. You could also use this one. Since the Sculpfun board does not contain the stepper driver module for this axis, you need to add one yourself (like this one). Then you have another axis and can control the two motors independently. If you don’t plan to integrate a z-axis, I would recommend using this option because you have less (no) settings to switch between the modes. Perfectly matched with engraving machine to engrave round objects】The One-piece rubber laser engraver rotary, hardness up to 70A, stronger friction, allowing you to perform 360-degree engravings on round or cylindrical objects such as cups, pens, bottles, pipes, bowls, drums and tubes and over-length plate engraving or cutting.

This is a perfect upgrade for expanding your engraving capabilities and adding variety to your projects. Designed to engrave tumblers and cylindrical objects with ease, this rotary roller is a must-have for any laser engraving and 3D printing enthusiast. Step 2A is meant for machines that only have a single port/stepper motor, such as the 3018 Pro, 3018 Prover, LE-1620 and LE-5040 Step 2B is meant for machines that use two stepper motors for their Y-axis, such as the 3020 Pro Max, LC-60A, and 4030 PROVerXL. Move the adjustable roller to adjust the distance between it and the fixed roller according to the actual situation. When the distance is appropriate, tighten the adjustable roller fixing bolts.Adjust the position of the rotary axis so that your cylinder will be parallel to the Y-axis and perpendicular to the X-Axis. Step 3: Install, Connect to and Configure LaserGRBL original scale high-precision engraving: SCULPFUN roller adopts high friction 70A rubber shaft to prevent slipping, and the linear speed of the rotating surface has been precisely calculated. Directly plug in the engraving machine cable to engrave the original image in 100% original scale. Does not enlarge or reduce the image. With LaserGRBL you can import vector files (NC, BMP, JPG, PNG, DXF…) and bitmap image files (bmp, jpg, png and gif), For the mathematicians among you, the value in the first case can also be derived mathematically: 40.8 = 65/80 × 50.26. That is, the ratio of steps per millimeter multiplied by the true circumference of the roll. Sculpfun Rotary